For product & service enquiries pleace contact info@rotajet.co.uk or call +44 (0) 1924 271446.

Machine

Enquiries

Our machines are supplied as stand-alone plant, or as a intregrated "turn-key" system for a new or existing recycling or waste processing facility. For large systems we are typically commissioned to carry design studies.

IBC / Tote Washing machines

IBC Batch Washing Machines

Rotajet manufacture a range of batch IBC washing machines for use with water based detergents. The machines are available with single stage wash or multiply stages to include rinse and DI rinse steam extraction and dry, depending on the application.

The units can be manufactured for use with low pressure cleaning nozzles for removing water soluble contamination or with high pressure nozzles for removing stubborn contaminates such as oils, paints, resins etc...

The machines require heating to achieve optimium cycle times, this can be done via. gas, oil, steam or electric heating.

Rotajet manufacture a range of aqueous and non-flammable solvents for use in the machines below is a breif list of the cleaning agents we recommend for use in the machines:


IBC Continuous Washing Machines

Rotajet manufacture a series of machines for washing large numbers of IBC`s per day. The IBC`s cleaned in this type of machine is contaminated usually with water based detergents, lights oils etc… For cle

The modular nature of the machines allows customers to increase capacity by adding further units. The machines can be manufactured to wash, rinse and dry IBC`s both inside and out. Typically this type of machine is used by customer that want to process in between 100 and 200 IBC`s per day in a 8 hour shift.For quantites of over 200 IBC`s per 8 hour shift Rotajet recommend that additional lines are installed.

The machines can be manufactured to wash, rinse and dry IBC`s both inside and out.

The machines require heating to achieve optimium cycle times, this can be done via. gas, oil, steam or electric heating.

Please note:
For more tenacious solis such as paints / inks etc… Rotajet recommend that a stand alone high pressure machine is used to clean the IBC`s.

Click on the links below to download/view drawing layout of the machine:

Drawing/Layout 1

Drawing/Layout 2

Drawing/Layout 3


Contamination Cleaning Agent % Temperature Cycle Time (minutes)
Water based chemicals 1-540 2-3 65-70 2-3
Oil 1-540 5-7 65-70 5-10
Grease 2-240 10 65-70 5-10
Water based inks 1-540 2-3 65-70 3-5
Solvent based inks Rotastrip 520 5 50-55 3-5
Water based paints 1-540 5 65-70 3-5
Solvent based paints Rotastrip 520 10 50-55 5-10
Epoxy resins Rotastrip RDP 100 45-45 10-15